Service manual

8-14 DECcolorwriter 1000
8 FRU Disassembly/Assembly
Removing the feed roller
1. If not already upright, flip over the upper half of the paper-feed unit to access
the feed roller; refer to Figure 8-6.
2. Remove the two E-rings securing the feed roller.
3. Remove the white nylon gear and its pin.
4. Remove the feed roller. If necessary, remove the right end bushing to create
more clearance for removing the roller.
For reassembly, reverse the steps you performed to reinstall the rollers.
Figure 8-12 Removing the feed roller
8699-30
Right 
end bushing
2
2
White 
nylon gear
Gear
pin
3