Service manual

Service Manual 8-13
FRU Disassembly/Assembly 8
Removing the upper aligning roller
1. Flip over the upper half of the paper-feed unit to access the upper aligning
roller (white nylon); refer to Figure 8-6.
2. Remove the two tensioning springs holding down each end of the upper
aligning roller.
3. Remove the two E-rings securing the upper aligning roller. Remove the
aligning roller from the guide plate and bronze bushings.
Figure 8-11 Removing the upper aligning roller
8699-29
2
Upper aligning
roller
Guide
plate
3
2
3