Service manual

Service Manual 8-9
FRU Disassembly/Assembly 8
Paper-pick roller, clutch, and paper-empty flag
You must remove the paper-pick roller and clutch prior to removing the paper-empty
flag. Removing the paper-empty flag is an optional step.
1. Remove the E-ring securing the pick roller clutch. Remove the clutch. (For
reassembly, note the keyed shaft the clutch fitsþonto.)
2. Remove the two E-rings securing the pick roller to the upper half of the
paper-feed module. Rotate and remove the paper-pick roller.
3. Remove the flag stop secured in place by one screw.
Figure 8-7 Removing the pick roller andþclutch
8699-27
Pick
roller
Pick
roller
clutch
1
2
2