Service manual

Service Manual 8-3
FRU Disassembly/Assembly 8
Printer cabinet panels
The printer features cabinet panels. To a certain degree the cabinet panels interlock; you
must remove some cabinet panels before you can remove others. You can remove the
following panels anytime:
n Top rear panel (two screws).
n Left and right side panels (two screws each.) Slide the front cover forward
and loosen the rear panel slightly before removing a side panel.
Before you remove the following panels, you must first remove the panels noted above:
n Rear cabinet panel – remove the top rear panel first.
n Top front cabinet panel – remove the front cover and open the top cover.
n Bottom front cabinet panel – remove the front cover and the side panels.
n Front cover panel – first remove the front cover.
n Top cover panel (exit tray) – open the top cover and remove the two screws
securing it to the thermal head frame. Do not overtighten the screws during
reinstallation.
Tools required
n #1 POSIDRIV® screwdriver