Service manual

8-2 DECcolorwriter 1000

8 FRU Disassembly/Assembly

Lower tray assembly

The Lower Tray Assembly, sometimes referred to as the second feeder, is serviced and

replaced as a unit. Its construction and operation is very similar to the paper feed unit in

the print engine.

1. Turn off the printer.

2. Unplug the Lower Tray Assembly cable from the rear of the printer.

3. Lift the printer off of the Lower Tray Assembly.

Reverse these steps to reinstall the Lower Tray Assembly making sure that the printer is

fully seated over the Lower Tray Assembly's guide pins.

Figure 8-1 Removing the Lower Tray Assembly

8699-56