Service manual

Service Manual 8-1
Chapter
8
FRU
Disassembly/Assembly
Required tools
n Magnetic tip screwdriver — 8.5 in.
n Extension tip
n #1 POSIDRIV® tip
n #2 POSIDRIV® tip
n Tweezers
n Hex wrench kit
n G-311S lubricating grease
n Antistatic mat
n Flat-blade screwdriver
n Needle nose pliers
n Volt-ohm-meter such as a
Tektronix DM250 Multimeter
n Magnifying lens such as
Micronta (Radio Shack) Cat# 63-851
n Spring removal tool