Service manual

Service Manual 6-31
Troubleshooting 6
Manufacturing service test. This test setting is used for servicing and testing the
printer during manufacturing. It is not intended for use in field servicing.
The rear panel LED flashing in a regular one flash-per-second rate means no errors were
detected and that the image processor's CPU is running.
Printing the configuration page
While the printer is idle, if you toggle Switch 4 up and then down, as detailed on the
previous page, then the DECcolorwriter 1000 prints a configuration page. The
configuration page shows a great deal of information regarding the data and set-up
values stored in NVRAM. Refer to the topic “The configuration page” on page 2-15 for
an explanation of the configuration page.