Service manual

8-4

Parts Replacement

Removing / Remounting the Printer's Casing and Base

• Disconnect the interface cable.

• Remove the paper input and output trays.

• Remove the memory card, if inserted.

• Open the top cover and remove the paper insertion guide 1 by lifting it from

the front and then turning it to free the studs from their respective slots.

• Free the casing from catches 2, 3, 4 and 5 (do so by inserting the blade of a

screwdriver in the points just indicated).

• Turn the casing backwards and disconnect the console's flat cable from

connector 6.

• Separate the base of the printer from the frame by pressing catch 7 and

lifting the part that has been released.

Fig. 8-3: Removing the printer's case and base

S-8.PM5 11/7/94, 17:314