Service manual

8-1

Parts Replacement

This chapter explains the different disassembly/reassembly procedures.

Premiliminary Warnings

To ensure maximum safety, power off the printer and unplug it from the

line voltage before beginning any operation.

All operations must be carried out in a clean and lear area.

Make sure the print head is in its parking position before powering off

the printer. When removing the print head from the printer, never rest

it on its electrical contacts, nor on the nozzles; never touch these parts.

No adjustements need to be made to the parts after their disassemly/

reassembly. To reassemble the parts, follow their disassembly procedues

in reverse order, make sure all the connectors are fitted properly.

When finished, run a test on the printer to make sure that the fault is

corrected.

S-8.PM5 11/7/94, 17:311