Service manual

3-18
Installation
Installation Setup
You can configure the printer with a printer driver corresponding to the basic
HP DJ 500C emulation.
The LJ 110/120 comes with a diskette containing the specific Windows 3.1
drivers, making it possible to take full advantage of the features offered by this
printer model.
The Digital DECwriter 110i monochrome printer driver is provided with the
LJ 110 and the LJ 120. The Digital DECcolorwriter 120ic color printer driver
is provided with the LJ 120 and the LJ 110 color kit option.
If the printer is not configured from the system it will use the factory default
settings.
Factory Settings
Run a print test to see how the printer has been configured at the factory. This
test will print the default settings and available fonts on a total of four pages.
To run this print test, turn to section "Print Test", page 3-16.
Features Factory Settings
Paper Size Letter (North America) or A4
Paper Insertion Paper tray
Perforation Skip Enabled
Text Scale Mode Disabled
Ink Save Mode (Text) Disabled
Graphic Density 75 dpi
Automatic Line Feed Disabled (CR=CR)
Print Quality Letter Quality
Width Type Normal
Font Courier Upright Portrait 10 12
Character Set CP 437 International
S-3.PM5 11/7/94, 17:1518