User guide

Figure 2–12 Connecting the Secondary Breakout Module to the Primary
Breakout Module
MLO-013266
1 2
Primary breakout module (54-24663-01)
Secondary breakout module (54-24729-01)
13. Connect the network cable (if any) to the twisted-pair Ethernet connector. See
Figure 2–13. Associated with the Ethernet connector are devices to convert
from twisted pair to ThinWire (P/N DETTR–AA). See Table 2–4.
14. Connect the console terminal cable to the Digital Alpha VME 4 module (refer
to Figure 2–13).
15. If you have an auxiliary terminal, connect it now. Set your console terminal
to a speed of 9600 bits/second, an 8-bit data word, and no parity.
Installation Procedures 2–21