Specifications

For best results, use only the center two-thirds of the fur-
nace chamber.
1. If you are heating a number of small parts,
spread them throughout the center of the fur-
nace chamber.
2. Keep objects away from thermocouple.
3. Use insulated tongs and mittens when loading
and unloading furnace.
4. Always wear safety glasses.
5. Use Barnstead|Thermolyne hearth plates if you
place load on bottom of chamber. Part #PHX2
(three are required).
36
Furnace Loading
Caution
Do not overload your furnace cham-
ber. If the load is to be heated uniform-
ly, it should not occupy more than two-
thirds of the furnace chamber. Failure
to observe this caution could result in
damage to furnace components.