Specifications

1
OUTLINE
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
GT CONVERTER2 SCREEN LAYOUT
5
GT CONVERTER2 OPERATION METHODSAPPENDICES
Appendix 4 List of functions added by GT Converter2 version update
App - 38
Appendix 4 List of functions added by GT Converter2
version update
The following describes functions added by GT Converter2 version update from Version 2.00A to 2.82L.
When using any function in the following table, use GT Converter2 of the specified version or later.
1 Added conversion specifications
Conversion specifications GT Conversion2 version
Added GOT types convertible
( Appendix 2.2 GP type)
GT15-X 2.27D
GT15-Q 2.43V
Added PLC types convertible (SHARP PLC "New Satellite JW Series" and other PLCs
( Appendix 2.3 PLC type))
2.09K
Action settings set for Mode/Special of T-tag 2.09K
Correspondence to "Back to previous
screen"
2.43V
Conversion of the condition set for D-Script trigger to [Ordinary] of trigger type 2.27D
"Change text background color." of the conversion option setting can be supported for GOT-A900 format
only
2.43V
Conversion of an alarm message into the Extended Alarm Popup Display 2.43V
Conversion of an alarm message into the Comment Group 2.43V
Conversion of name plate characters of switch, lamp and message display as name plate of conversion
destination object
2.43V
Converting rounded rectangles and chamfered rectangles into those available for GOT1000 series only
Converting chamfered rectangles into polygons when converting rectangles into data available for GOT-
A900 series
2.73B
When the relative setting is specified for G-tag and g-tag, the maximum and minimum values in the input
range are converted into the upper and lower limits.
2.73B
Data in the alarm range set for K-tag and the keypad input dislay are converted into data in the display
range of the numerical input. Data outside the alarm range are converted into data in the input range of
the numerical input.
2.73B
When a word address of the display start line is set for X-tag, the address is converted into data of a
monitor device.
2.73B
When the relative setting is specified for certain graphs, the maximum and minmum values in the input
range are converted into the upper and lower limits.
2.73B
Applicable to the conversion of GOT 800 series project data with the barcode setting. 2.73B
Applicable to the conversion of GOT 800 series project data with the password setting data. 2.73B
Displaying the conversion logs when converting data created with GP-PRO/PB III (DOS Version) or
SW3NIW-A8GOTP
2.77F
Applicable to the conversion of GOT800 series project data that group figures are displayed with the XOR
when the display mode of part display is set to the XOR.
2.82L
For the conversion of GOT800 series project data, [Font Control] of [Standard Font] for [System Settings]
is set to [Japanese (supporting Europe)].
2.82L