Specifications

App - 27

Appendix 2 Conversion Specifications for GP-PRO/PB III Series

Appendix 2.9 LS area

Appendix 3 Procedure to Convert GP-PRO/PB III

Series Project Data

This section explains the procedure to convert project data created by Digital Electronics Corporation's

GP-PRO/PB series screen editor software into GT Designer2 project data.

Conversion environment (Screen editor software)

Screen editor software before conversion: GP-PRO/PB series

Screen editor software after conversion : GT Designer2 Version2

Model

Model before conversion: GP2000 or earlier

Model after conversion : GOT1000 series

The descriptions regarding the other company information in the procedure are based on our research.

Make sure to validate the data after conversion by the user.

For the tag conversion availability list (separate document), contact your local Mitsubishi representative.

Appendix 3.1 Conversion procedure

Procedure

Points to be checked

(Including precautions and tips for conversion)

Reference

1 Checking the original data

• Examine the original data.

• Print the tag list with the GP-PRO/PB series.

(The printed data is used to check the original data and the

converted data.)

• Project information

• System setting

• Screen information (Screen hard copy, screen load list, tag list)

• Used device list

• Create the list of used tags per screen. • Use the printed tag list to check if uncorrected items do not exist

when the converted data is manually corrected.

• Check the system configuration.

• Check the GP system setting with the GP-PRO/PB series.