Specifications

1
OUTLINE
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
GT CONVERTER2 SCREEN LAYOUT
5
GT CONVERTER2 OPERATION METHODSAPPENDICES
Appendix 2 Conversion Specifications for GP-PRO/PB III Series
Appendix 2.6 Tag information
App - 18
: Convertible, : Inconvertible
*1 When the relative setting is specified for G-tag and g-tag, the maximum and minmum values in the input range
are converted into the upper and lower limits.
*2 Data in the alarm range set for K-tag are converted into data in the display range of the numerical input. Data
outside the alarm range are converted into data in the input range of the numerical input.
*3 When a word address of the display start line is set for X-tag, the address is converted into data of a monitor
device.
3 Conversion specifications of action settings set for Mode/Special of T-tag
The following describes the conversion specifications of action settings set for Mode/Special of T-tag.
When any action setting other than those in the following table is set, the T-tag will not be converted.
Tag information item
Conversion
applicability
Conversion destination Remarks
v-tag (Extended Video Window Display)
------ ------
W-tag (Write to Device) Status Observation: Screen Not converted when action setting is bit inversion.
X-tag (Display Text Data)*3 Comment Display ------
Trend Graph Display: Designated
Screen
Trend Graph
------
Trend Graph Display: Channel Setting Trend Graph ------
Action setting of T-tag Action setting of key code switch
Up Move cursor upward
Down Move cursor downward
OK Write to the device and move the cursor
Start Show cursor
Start (Freeze Mode) Show cursor
Finish Hide cursor
Ack Display date/time of selected data
Ack All Display date/time of all data
Roll Up Scroll up by one line
Roll Down Scroll down by one line
Delete Clear the selected alarm data
Delete All Clear all alarm data
Clear Recovered Alarm Clear the selected alarm data
Clear All Recovered Alarms Clear all alarm data
Back to previous screen Move to upper-hierarchy