Specifications

1
OUTLINE
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
GT CONVERTER2 SCREEN LAYOUT
5
GT CONVERTER2 OPERATION METHODSAPPENDICES
Appendix 2 Conversion Specifications for GP-PRO/PB III Series
Appendix 2.6 Tag information
App - 16
: Convertible, : Inconvertible
Appendix 2.6 Tag information
1 Restrictions
The following describes the restrictions related to tag information conversion.
(1) Display angle is always converted to 0 degree.
(2) The tag information that extends off the screen edge is inconvertible.
(3) Indirect color setting will be converted to white.
(4) When an input code, which is not supported by the GOT (example: MSB code) is included, the tag
information will not be converted.
(5) When the input/display range of a relative display is indirect, it is converted into an object in which
data operation has not been set.
(6) When Color change has been set Alarm tag, the tag will be converted without alarm action.
(7) Zero display settings are inconvertible.
On the GOT, data 0 is shown as "0" on a screen.
(8) When Indirect offset devices are set to operation data have been , the operation data will be
converted without operation processing.
(9) When Indirect offset devices are set to range values of Alarm/Range, the range values will be
converted without Alarm/Range.
(10) Q-tags will be converted into alarm history.
It is not converted into an extended alarm history.
(11) Level-by-level color switch display of Q tags are inconvertible.
Load Screen Set Overlay Screen
When the screen to be read is an image screen, it is
converted into parts display (display condition: GB40
Rising).
Load Mark
------ Mark calls are inconvertible as well as Mark screens.
Graphic data item
Conversion
applicability
Conversion destination Remarks