Specifications

1
OUTLINE
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
GT CONVERTER2 SCREEN LAYOUT
5
GT CONVERTER2 OPERATION METHODSAPPENDICES
Appendix 1 Conversion Specifications for GOT800 Series
Appendix 1.2 Conversion specifications for sprites
App - 2
Appendix 1.2 Conversion specifications for sprites
1 Restrictions
The following describes the restrictions related to the conversion of sprites.
(1) Figures that cannot be changed as attributes for display
When converting the lamp display project data or the touch switch project data, the following basic
figures are converted as the library project data.
The project data for figures that are converted as the library data cannot change the attributes for
display of GT Designer2 ([Frame], [Lamp], [Switch], [Background], and [Pattern]).
To change attributes for display, change [Figure] for the display style to the basic figures.
2 Conversion specifications
The following indicates the conversion specifications of sprites.
(Continued to next page)
• LAMP 9 • LAMP 10 • LAMP 11
• LAMP 12 • LAMP 22 • SWITCH 34 ON
• SWITCH 34 OFF • SWITCH 45 ON • SWITCH 45 OFF
Item
Conversion
applicability
Remarks
Numeric Value Display ------
ASCII Display ------
Clock Display ------
Comment Display ------
System Alarm List Display ------
User Alarm List Display ------
Parts Display
When setting [XOR] for [Display mode], the settings after
conversion are shown below.
• GOT1000
[While display mode of part display is XOR, grouped
figures are displayed by XOR.] is set for [Auxiliary Setting].
•GOT-A900
[Enable change of XOR display in part display] is set in the
GOT800 Compatible Mode dialog box.
Parts Movement ------
Lamp Display ------
Panel Meter Display ------
Level Display ------
Trend Graph Display ------
Line Graph Display ------
Bar Graph Display ------
Touch Key ------