Specifications

App - 1
Appendix 1 Conversion Specifications for GOT800 Series
Appendix 1.1 Graphics Conversion specification
APPENDICES
Appendix 1 Conversion Specifications for GOT800
Series
This section explains the conversion specifications of project data for the GOT800 series.
(1) Precautions for data conversion
GT Converter2 will not be liable for the damage caused by data conversion, from
the existing data to GOT1000 series or GOT-A900 series.
Before downloading converted project data to the GOT, be sure to check GT
Designer2 setup and make corrections if necessary.
Note that any function that is not supported by the conversion destination GOT
will not be converted.
(2) Converting a file with a name in other than English (Japanese, Chinese or other
language)
The file cannot be converted when the file name is in other than English.Change
the file name to English before conversion.
(3) Converting a file including character strings in other than English (Japanese,
Chinese or other language)
The character strings cannot be converted correctly when the conversion source
file includes character strings in other than English.
Change the character strings to English with the drawing software before
conversion.
Even the items described convertible in this Appendix may not be convertible depending on project setup.
If conversion failed in some items, descriptions of the error items are given in conversion log.
Section 5.4 Checking Conversion Result
Appendix 1.1 Graphics Conversion specification
All graphics convertible.