Specifications

5 - 16
5.4 Checking Conversion Result
5.4.1 Conversion log list
(Continued to next page)
Log
code
Message
Conversi
on result
Corrective action
- === Screen common items will be converted Info ---
- === Detailed comment will be converted Info ---
- === Status observation will be converted Info ---
- === Figure/sprite data will be converted Info ---
- === Header of an all screen common setting file will be
converted
Info ---
- === Operation panel will be converted Info ---
- === Parts data will be converted Info ---
- !!! No password conversion due to the conversion options Info For converting the password, check [Convert Password.] in
the conversion option setting.
( Section 5.3.2 Conversion option settings)
- ### Project index table creation Info ---
- ### Package information file conversion Info ---
- ### Base/window file conversion Info ---
- ### Report setting file conversion Info ---
- ### All screen common setting file conversion Info ---
- ### Comment file conversion Info ---
- ### HQ text file conversion Info ---
- ### Part file conversion Info ---
- ### Initialization processing Info ---
- There is no data in the offset TMP file Info Perform the following before conversion.
• Exit the other running applications.
• Restart Microsoft
®
Windows
®
.
- The size is changed back to the default. Info ---
- Sprite code error Info Before conversion, remove the commands that are not
supported by GT Converter2 with the screen editor software.
- File of default setting will be created. Info ---
- Failed to secure the buffer Info Perform the following before conversion.
• Exit the other running applications.
• Restart Microsoft
®
Windows
®
.
- Failed to write to the buffer Info
- Unable to open the file Info
- Failed to open the file. Info
- Failed to write the file. Info
- Failed to write data to the file Info
- Failed to open the file Info
- The file size is 0 Info
- Unable to get the file size Info