Specifications

1
OUTLINE
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
GT CONVERTER2 SCREEN LAYOUT
5
GT CONVERTER2 OPERATION METHODSAPPENDICES
5.4 Checking Conversion Result
5.4.1 Conversion log list
5 - 13
(Continued to next page)
Log
code
Message
Conversi
on result
Corrective action
- *** Getting file information... Info ---
- > Converting into M0 device Info ---
- > Exceeded the maximum number of characters (12)
used for a file name
Info After the conversion, correct the error in the data shown in
the message with GT Designer2.
- > Detected Z device set for bit specification of word. Info ---
- > Exceeded the maximum number of characters (32)
used for a screen title
Info After the conversion, correct the error in the data shown in
the message with GT Designer2.
- > Initialized a result display file Info ---
- A8GOTP,got Conversion initiation Info ---
- A8GOTP.got Conversion termination Info ---
- Conversion of A8GOTP.got is not performed Info After the conversion, correct the error in the data shown in
the message with GT Designer2.
- Comment.a8 Conversion initiation Info ---
- Comment.a8 Conversion termination Info ---
- Hqfont.a8 Conversion initiation Info ---
- Hqfont.a8 Conversion termination Info ---
- Conversion of Hqfont.a8 is not performed Info After the conversion, correct the error in the data shown in
the message with GT Designer2.
- Conversion of PACKAGE.A8 is not performed Info
- Package.a8 Conversion initiation Info ---
- Package.a8 Conversion termination Info ---
- Conversion of Parts.a8 is not performed Info After the conversion, correct the error in the data shown in
the message with GT Designer2.
- Parts.a8 Conversion initiation Info ---
- Parts.a8 Conversion termination Info ---
- Warning!! Excess of device types Info After the conversion, correct the error in the data shown in
the message with GT Designer2.
- Warning!! Appropriate color data cannot be found Info
- XXX <File name> Unable to open the file XXX Info Perform the following before conversion.
• Exit the other running applications.
• Restart Microsoft
®
Windows
®
.
- XXX Failed to write data to PACKAGE.A9 file XXX Info
- XXX PLC Type is different XXX Info Before conversion, change the PLC type to one that is
supported by GT Converter2 with the screen editor software.
- XXX Conversion of this sprite is not performed XXX Info After the conversion, correct the error in the data shown in
the message with GT Designer2.
- XXX Running out of free space on the disk XXX Info Perform the following before conversion.
• Exit the other running applications.
• Restart Microsoft
®
Windows
®
.
- XXX Reaffirm Device No. XXX Info After the conversion, correct the error in the data shown in
the message with GT Designer2.
- XXX Failed to write into the buffer XXX Info Perform the following before conversion.
• Exit the other running applications.
• Restart Microsoft
®
Windows
®
.
- XXX Unable to open the file XXX Info
- XXX Failed to open the file XXX Info
- XXX Failed to create a project index XXX Info
- XXX Insufficient memory XXX Info