Specifications
1
OUTLINE
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
GT CONVERTER2
SCREEN LAYOUT
5
GT CONVERTER2
OPERATION METHODSAPPENDICES
5.2 Opening Conversion Source File
5 - 3
3 Opening the conversion source file displays the project information screen.
The project information obtained from the conversion source file is displayed on the project information
screen.
"Unknown" is shown for items for which project information could not be obtained.
*1 "Unconvertible" is displayed in either of the following cases:
• When "Unknown" appears in "Type"
Check if the conversion source file is faulty or not with the screen editor software.
• When the PLC type displayed in "PLC" does not support conversion (
Appendix 2.3 PLC type)
Item Description
File name Displays the project filename.
Type
Displays the type of the screen editing software used to create the conversion source file.
ProPB3 for Windows Project: Displayed when the conversion source file was created by any of the following
software.
•GP-PRO/PB III for Windows95
•GP-PRO/PB III for Windows
•GP-PRO/PB III C-Package01
•GP-PRO/PB III C-Package02
•GP-PRO/PB III C-Package03
ProPB3 for DOS Project: Displayed when the conversion source file was created by GP-PRO/PBIII (DOS
version).
A8GOTP Project: Displayed when the conversion source file was created by SW3NIW-A8GOTP.
Title Displays the comment (GP-PRO/PB III series) or project title (SW3NIW-A8GOTP) set for the project.
PLC Displays the PLC type set for the project.
Terminal Displays the GP type (GP-PRO/PB III series) or GOT type (SW3NIW-A8GOTP) set for the project.
Conversion applicability
The conversion source file can be converted when "Convertible" is displayed.
Conversion is not allowed when "Unconvertible" (*1) is displayed.
Conversion
applicability