Specifications

1
OUTLINE
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
GT CONVERTER2 SCREEN LAYOUT
5
GT CONVERTER2 OPERATION METHODSAPPENDICES
5.1 Operating Procedures
5 - 1
5. GT CONVERTER2 OPERATION METHODS
5.1 Operating Procedures
The GT Converter2 operating procedures are shown below.
Remark
To Reuse Project Data Created for A64GOT or A77GOT
Using SW3NIW-A8GOTP, convert the project data for A64GOT or A77GOT into
GOT800 file format.
The project data in GOT800 format can be converted into GT Designer2 project data
using GT Converter2.
Refer to the following manual for the details.
SW3NIW-A8GOTP Graphic Settings Software Package Operating
Manual (Monitor Screen Creation Manual) (IB-66793) (Section 2.5 Using
Previously Created GOT Data)
Start GT Converter2.
Start
Open conversion source file.
Confirm project information.
Set conversion method and start conversion.
View conversion log and check result.
End
• • •
• • •
• • •
• • •
• • •
GT Designer2 Version Basic Operation/Data Transfer Manual
(Section 2.4 Starting Software)
Section5.2 Opening Conversion Source File
Section5.2 Opening Conversion Source File
Section5.3 Conversion
Section5.4 Checking Conversion Result