Specifications

1
OUTLINE
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
GT CONVERTER2 SCREEN LAYOUT
5
GT CONVERTER2 OPERATION METHODSAPPENDICES
1.1 Features
1 - 1
1. OUTLINE
This manual explains the specifications and operation methods of GT Converter2.
Installation method of GT Converter2
For the installation method of GT Converter2, refer to the following manuals.
GT Designer2 Version Basic Operation/Data Transfer Manual
(2.2 Installing the Software Programs)
1.1 Features
GT Converter2 is software that converts project data created by existing screen editor software into those
available for use on GT Designer 2.
1 Compatible with Digital Electronics Corporation's screen editor software
• • • • • • • • • • • • • • • • • Section 3.1 Compatible File Formats
Project data created by Digital Electronics Corporation's GP-PRO/PB series screen editor software
can be converted into GT Designer2 project data (for the GOT1000 or GOT-A900).
The GOT1000 or GOT-A900 series can be selected as a GOT type.
2 Compliance with GOT800 series screen editor software
• • • • • • • • • • • • • • • • • Section 3.1 Compatible File Formats
Project data created by the GOT800 series screen editor software, SW3NIW-A8GOTP, can be
converted into GT Designer 2 project data (for the GOT1000 or GOT-A900).
The GOT1000 or GOT-A900 series can be selected as a GOT type.
GP-PRO/PB series
GT Converter2
GT Designer2
SW3NIW-A8GOTP
GT Converter2
GT Designer2