User manual

Restoring the factory defaults
will erase any previous settings.
Reset or restore the system after
power on.
There is a button in the back of the Network Camera. It is used to
reset the system or restore the factory default settings. Sometimes
resetting the system sets the system back to normal state. If the
system problems remain after reset, restore the factory settings and
install again.
RESET:
Click on the button.
RESTORE:
1. Press on the button continuously.
2. Wait for self-diagnostic to run twice.
3. Free the button as soon as the second
self-diagnostic starts.
B. URL commands of the Network Camera
For some customers who already have their own web site or web control application, the
Network Camera can be easily integrated through convenient URLs. This section lists the
commands in URL format corresponding to the basic functions of the erase Network Camera.
Get server parameter values
Note: This request require administrator access
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/getparam.cgi?[<parameter>]
[&<parameter>…]
where the <parameter> should be <group>[_<name>] or <group>[.<name>] If you do not
specify the any parameters, all the parameters on the server will be returned. If you specify only
<group>, the parameters of related group will be returned.
When query parameter values, the current parameter value are returned.
Successful control requests returns paramter pairs as follows.
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n