User's Manual

Internet Access
To configure your PCs to use the Wireless Broadband Router for
Internet access:
• Ensure that the DSL modem, Cable modem, or other permanent
connection is functional.
• Use the following procedure to configure your Browser to access
the Internet via the LAN, rather than by a Dial-up connection.
For Windows 2000
1. Select Start Menu - Settings - Control Panel - Internet Options.
2. Select the Connection tab, and click the Setup button.
3. Select "I want to set up my Internet connection manually, or I
want to connect through a local area network (LAN)" and click
Next.
4. Select "I connect through a local area network (LAN)" and click
Next.
5. Ensure all of the boxes on the following Local area network
Internet Configuration screen are unchecked.
6. Check the "No" option when prompted "Do you want to set up an
Internet mail account now?".
7. Click Finish to close the Internet Connection Wizard.
Setup is now completed.
For Windows XP
1. Select Start Menu - Control Panel - Network and Internet
Connections.
2. Select Set up or change your Internet Connection.
3. Select the Connection tab, and click the Setup button.
4. Cancel the pop-up "Location Information" screen.
5. Click Next on the "New Connection Wizard" screen.
6. Select "Connect to the Internet" and click Next.
7. Select "Set up my connection manually" and click Next.
8. Check "Connect using a broadband connection that is always
on" and click Next.
9. Click Finish to close the New Connection Wizard.
Setup is now completed.
46