User Manual

Operation and Status

Connection Log

• The Connection Log shows status messages relating to the

existing connection.

• The "Clear Log" button will restart the Log, while the

Refresh button will update the messages shown on screen.

Buttons

Connect

If not connected, establish a connection to your ISP.

Disconnect

If connected to your ISP, terminate the connection.

Clear Log

Delete all data currently in the Log. This will make it easier to

read new messages.

Refresh

Update the data on screen.

Connection Status - L2TP

If using L2TP, a screen like the following example will be displayed when the "Con-

nection Details" button is clicked.

Figure 23: L2TP Status Screen

Data - L2TP Screen

Internet

Physical Ad-

dress

The hardware address of this device, as seen by remote

devices on the Internet. (This is different to the hardware

address seen by devices on the local LAN.)