User's Manual

5-3. Setting Phase / Frequency
In case it is not optimally set even though automatically adjusting it, use PHASE
function.
- Press button on the remote control.
- Move to PC menu by using button.
- Move to PHASE menu by pressing button.
- Adjust settings by controlling Volume button.
- Once the setting is complete, press button.
EXIT
MENU
CH
MENU
73
ENGLISH
5-2. Setting PC Scale Mode
When being used as a PC Monitor, the scale can be adjusted.
PC Monitor Scale works only when PC signal is connected and input signals are
selected in RGB mode.
- Press button on the remote control.
- Select a desirable scale by using Volume button.
- Once the setting is complete, press button.
1. 1:1 : Display the resolution as 1:1.
2. Fill All : Display picture in the full screen regardless of the resolution.
3. Aspect Ratio : Display the resolution in 4:3 aspect ratio. Also, it can be set in OSD
menu if JOG button is used.
EXIT
SCALE
EN 72
26” WIDE TFT-LCD TV