User's Manual

3-12. Stereo
If you use the TV in an area with weak or bad reception, there may cause sound noise
or other problem when selecting a channel. In this case, cancel the setting.
It can be canceled only by the remote control.
- Press button on the remote control to cancel stereo and
returning to Mono.
- Press button in Mono returns to Stereo.
- If Stereo is off, it is always set as Mono even though a channel is
changed.
3-13. Bilingual
(Multi-Language Broadcasting)
In case of multi-language broadcasting, it can be converted if you wish to listen to
other language except main language.
Multilanguage broadcasting can be set only by the remote control.
- Every time pressing button on the remote control, the
language display is changed in good order of main language
sub
language main + sub languages (dual language).
(Main - Sub - Dual)
BILINGUAL
STEREO
STEREO
STEREO
49
ENGLISH
3-11. DTV Field
Depending on a DTV receiver, a signal is not identical with standard signal. It may
cause unclear display and if you change DTV Field value, it will be recovered to the
normal picture (it can be set only by the remote control).
- Press button.
- Press button to go into DTV Field Setting Menus.
- Set Not Invert/Invert with Volume button.
- Initially, ‘Not Invert’ is defaulted and you may change it to ‘Invert’ if the
display is not normal.
- Once the setting is complete, press the button.
EXIT
MENU
SET UP
EN 48
26” WIDE TFT-LCD TV