User's Manual

3-3. Change TV Channel Mode
Please set your broadcast type between Air and Cable.
If its mode is set as Air, some Cable broadcasts are not able to watch.
- Press CATV button on the remote control.
- Set the CH Mode between Air & Cable by using Volume button on the remote
control.
- Once the setting is complete, press CATV button or EXIT button.
- Also, it can be set in OSD menu if JOG button is used.
SCREEN
Auto Scan
PICTURE
TV
PC
SOUND
OPTION
CH Fine Tune
CH Memory
CH Swap
CH Mode
CH Mode
Air Cable
CH Mode
Air Cable
37
ENGLISH
2. Setting Sleep Timer
- Press button on the remote control.
- Set the sleep timer by using volume button on the remote control.
- Sleep Timer can be set from Off to 180 minutes.
- Once the setting is complete, press button.
EXIT
MENU
EN 36
26” WIDE TFT-LCD TV