User's Manual

3. Channel Selection
1) Press button on the remote control to change channels.
2) Press numeric buttons to go to a channel directly.
3) Press buttons ( ) on the TV set to increase or decrease TV channels.
4. Volume Control
1) Increase/decrease volume by pressing button on the remote control.
2) Press button (< / > ) on the TV set to control the volume.
Volume Button on the TV SetVolume Button on the remote control
VOL
VOL
Channel button on the TV setChannel button on the remote control
CH
CH
33
ENGLISH
3-1. Watching TV
1. Precautions in the initial installation
1) Check whether TV antenna cable is properly connected.
2) After checking whether the voltage is 100V or 220V, supply the electric power and
connect the adaptor to the TV.
At the moment, TV is in standby.
2. Turning on TV
1) Turn on the Power button directly on the set or by remote control.
2) Each pressing the button turns on or off the set.
Power Button on the TV SetPower Button on Remote Control
EN 32
26” WIDE TFT-LCD TV