User's Manual

PC Monitor Menu
■ Picture
1) Brightness
It controls the LCD brightness.
2) Contrast
It controls the LCD contrast.
3) h position
It controls horizontal image position.
4) v position
It controls vertical image position.
5) phase
It adjusts the focus, clarity and stability of image.
6) clock
It adjusts the horizontal size of display.
7) Scaling
Fill all : Image displayed in full screen regardless the resolution.
Fill aspect ratio : Image displayed in full screen horizontally or vertically.
One to one : Image displayed in original size as received from input.
6) Channel search
This searches and stores channels as remote control (SCAN button function).
To search for channels, either press the < VOL > button on the right side of
the remote control or turn the rotary button to the right.
To stop channel search, press the < MENU > button on the remote control or
on the function button.
✽ 2 Channels 2~69 are for “off-air”(antenna) and channels 1 and 14~69 are
for cable channels.
Channels 14~69 are for both antenna and cable channels. To select one of
them, use source menu of TV menu.
7) Channel swap
It changes stored channel numbers at will.
You can do this by either pressing the < VOL > button on the right side of
the remote control or by turning the rotary button of function button to the
right.
After the Channel Swap window appears on the screen, you can change the
current channel number to a new one you want. You can select new channel
numbers to store by pressing the right < VOL > button on the remote
control. You can restore former state by pressing the left < VOL > button.
8)TV system
It selects TV broadcasting system of the area. KOREA / USA / JAPAN
24 25
DCM -1 7 WT