User's Manual

DIGITAL CONTROL INCORPORATED
DigiTrak Falcon
™
F5

Operator’s Manual 61
Turning Target Steering On
The target depth is the depth at which you want the transmitter when it reaches the location
under the receiver. To set the desired target depth on the receiver, toggle up at the Locate
screen to open the Target Steering menu.
Target Steering Menu
The Target Steering menu displays either the last set target depth or the 1.5 ft. default value.
 To use the displayed value as the desired target depth, click the trigger.
 To enter a new target depth, select the keypad, enter the value in the appropriate units,
and select Enter .
Positioning the Receiver as the Target
Setting a target depth on the receiver activates Target Steering, and the Locate screen on the
receiver now displays depth and distance from transmitter to receiver. The remote display on
the drill automatically changes to Target Steering mode.
Target Steering Locate Screen on the Receiver (with pressure data)
Programmed target depth
Transmitter in ground
pointing toward target
below receiver
Turn on programmed
target depth
Program new
target depth
Receiver
Transmitter temperature
Approximate
transmitter depth
Transmitter pitch
Locating target (FLP)
Roll/pitch
update meter
Roll indicator
Horizontal distance between
transmitter and receiver
Fluid pressure