User's Manual

DIGITAL CONTROL INCORPORATED
DigiTrak Falcon
™
F5

Operator’s Manual 35
Perform Level Check
This check confirms that the internal sensors that measure the inclination of the receiver are
working correctly. An inaccurate sensor would cause erroneous depth and location readings.
Place the receiver on generally level ground and click Continue . The ground does not
have to be perfectly level.
Level Test Screen 1
Rotate the receiver 180 degrees so it faces the opposite direction, as illustrated by the icon
on the screen, and click Continue again.
Level Test Screen 2
The receiver beeps four times, flashes a confirmation message, and returns to the Main
menu.
If the level check fails, the receiver beeps twice and displays an error screen. Click Retry
and repeat the test as described above. If the check fails again, contact DCI Customer
Service.