User's Manual

DIGITAL CONTROL INCORPORATED
24 DigiTrak Falcon
™
F5

Operator’s Manual
Set Time and Calendar Menu
Set the time and date on your receiver. This is necessary when you are using the DataLog
function.
Time and Calendar Keypad
Setting the Time
The time function runs on a 24-hour clock. To set the time:
1. Select the time icon so it is the active function .
2. Enter the time one digit at a time from left to right. For example, to set the clock to 13:39
(1:39 pm), select “1”, then 3, 3, and 9.
3. Select the blue Enter arrow.
Setting the Calendar
The calendar function displays the date by month/day/year. To set the date:
1. Select the calendar icon so it is the active function . The display window on the
keypad changes to show a date format.
2. Enter the date one digit at a time from left to right. The date format is MM/DD/YYYY. For
example, to set the date to January 2, 2016 (01/02/2016), select “0”, then 1, 0, 2, 2, 0, 1,
and 6.
3. Select the blue Enter arrow.
Telemetry Channel Menu
This menu has five telemetry settings (1, 2, 3, 4, and 0). For communication to occur between
the receiver and remote display, both devices must be set to the same telemetry channel.
The current telemetry setting is highlighted when this menu opens.
Select the desired telemetry channel on the receiver. To conserve receiver battery life, select
“0” to turn telemetry off.
Enter arrow
Time value
(date displays here
when calendar is the
active function)
Time
(shown active)
Calendar