User's Manual

DIGITAL CONTROL INCORPORATED
ii DigiTrak Falcon
™
F5

Operator’s Manual
403-2400-00-A, Mar 2016
© 2015 by Digital Control Incorporated. All rights reserved.
Trademarks
Aurora

, the DCI logo, DigiTrak
®
, F5
®
, and Target Steering
®
are U.S. registered trademarks and the Aurora logo,
Ball-in-the-Box™, DigiTrak Falcon™, F Series™, and SuperCell™, are trademarks of Digital Control Incorporated.
Patents
U.S. and foreign patents apply to the product covered by this manual. For details, please visit
www.DigiTrak.com/patents.
Limited Warranty
All products manufactured and sold by Digital Control Incorporated (DCI) are subject to the terms of a Limited
Warranty. A copy of the Limited Warranty is included at the end of this manual; it can also be obtained at
www.DigiTrak.com.
Important Notice
All statements, technical information, and recommendations related to DCI products are based on information
believed to be reliable. However, DCI does not warrant or guarantee the accuracy or completeness of such
information. Before using any DCI product, the user should determine the suitability of the product for its intended
use. All statements herein refer to DCI products as delivered by DCI for use with horizontal directional drilling in the
ordinary course, and do not apply to any user customizations, third-party products, or any usage of the DCI product
outside of the ordinary course. Nothing herein shall constitute a warranty by DCI nor will anything herein be deemed
to modify the terms of DCI’s existing Limited Warranty applicable to all DCI products. DCI may update or correct the
information in this manual from time to time. You may find the most recent version of this manual on DCI's website,
www.DigiTrak.com. Under Service & Support, click Documentation and select from the Manuals drop-down menu.
Compliance Statement
This equipment complies with Part 15 of the Rules of the FCC and with Industry Canada license-exempt RSS
standards and with Australia Class License 2000 for LIPD (low interference potential devices). Operation is subject to
the following two conditions: (1) this equipment may not cause harmful interference, and (2) this equipment must
accept any interference received, including interference that may cause undesired operation. DCI is responsible for
FCC compliance in the United States: Digital Control Incorporated, 19625 62nd Ave S, Suite B103, Kent WA 98032;
phone [phone] or 800.288.3610 (US/CA).
Changes or modifications to any DCI equipment not expressly approved and carried out by DCI will void the user’s
Limited Warranty and the FCC’s authorization to operate the equipment.
CE Requirements
DigiTrak receivers are classified as Class 2 radio equipment per the R&TTE Directive and may not
be legal to operate or require a user license to operate in some countries. The list of restrictions and the required
declarations of conformity are available on DCI’s website at www.DigiTrak.com. Under Service & Support, click
Documentation and select from the CE Documents drop-down menu.