User's Manual
Table Of Contents
- Safety Precautions and Warnings
- Dear Customer:
- Introduction
- Receiver
- Transmitter
- Remote Display
- Battery Charger
- Locating Instructions
- Appendix A: System Specifications and Maintenance Requirements
- Appendix B: Projected Depth Versus Actual Depth and the Fore/Aft Offset
- Appendix C: Calculating Depth Based on Distance Between FLP and RLP
- LIMITED WARRANTY
DIGITAL CONTROL INCORPORATED
Dear Customer:
We would like to thank you for choosing the DigiTrak LT2 Locating System. We are
proud of the equipment that we have been designing and building in Washington State
since 1990. We believe strongly in providing a unique, high-quality product and standing
behind it with superior customer service and training.
We ask that you take the time to read this entire manual—especially the section on
safety. Also, please fill out the warranty registration and mail it in or fax it to us at 253-
395-2800. We will put you on the Digital Control mailing list and send you product
upgrade information and our FasTrak™ newsletter.
We also ask that you feel free to contact us at the most convenient of our global offices
listed on the front cover if you are experiencing any problems with the equipment or
have any questions regarding its use. Our Customer Service Department is available 24
hours a day, 7 days a week to provide assistance.
As the horizontal directional drilling industry grows, we try to keep an eye on the future
to develop equipment that will make your job faster and easier. We encourage you to
stay current by visiting our web site on the Internet at www.digitrak.com or by giving us a
call at any of our offices
worldwide.
We welcome questions, comments, and ideas.
Digital Control Incorporated
Kent, Washington
November 2008
DigiTrak
®
LT2™ Operator’s Manual 7