User's Manual

Locating
44 Vermeer
®
DigiTrak
®
L
T
™
Operator’s Manual
2. Walk forward until the "+" sign changes to a "–" sign. Note that the target has moved into the box.
Target in the Box
3. Turn the receiver 90° from the transmitter heading while holding the receiver steady and level, and
find the point where the "–" sign changes to a "+" by moving the receiver forward or backward as
needed; the target should be in the box. This is the RLP. Release the trigger.
4. Mark this location as the RLP.
5. Connect the RLP to the FLP by a line. This line represents the transmitter heading.
V3-1000-00-B