User's Manual

Locating
40 Vermeer
®
DigiTrak
®
L
T
™
Operator’s Manual
Finding the RLP
1. While standing above the transmitter still facing the drill, continue walking toward the drill; the target
will appear in the top left corner of the display and the depth will increase.
Target in Top Left Corner
2. Walk forward until the target moves into the box.
Target in the Box
3. Turn the receiver 90° from the transmitter heading while holding the receiver steady and level, and
again put the target in the box by moving the receiver forward or backward as needed.
4. Mark this location as the RLP.
5. Connect the RLP to the FLP by a line. This line represents the actual transmitter heading.