User's Manual

®
Vermeer
®
DigiTrak
®
L
T
™
Operator’s Manual 27
Remote Display
DigiTrak LT Remote Display
The DigiTrak LT remote display, which is located at the drill rig, receives signals from the LT receiver and
displays that information on a screen very similar to the receiver display screen. The remote display has a
main display screen and five menu options (power on/off, telemetry channel settings, backlight on/off,
depth unit selection, and pitch unit selection). The main remote display screen is described below, and
then the menu options are explained.
Main Display Screen
The main remote display screen shows information sent from the receiver in a format very similar to the
display on the receiver. However, the battery status symbol displays the status of the remote display
battery rather than that of the receiver. The on/off button on the remote works similarly to the trigger on
the receiver.
Mounting
Bracket
Display
Window
On/Off
Button
Main Remote Display Screen
Height-Above-
Ground Setting
On/Off Button
Remote Display
Battery Status
Roll/Pitch Indicator
(should be flashing)