User's Manual

Receiver
22 Vermeer
®
DigiTrak
®
L
T
™
Operator’s Manual
PITCH UNITS
This display menu allows you to set the LT system to display pitch values in either degrees or percent of
slope.
1. Click the trigger to advance to the pitch units menu. The display will indicate the current setting.
2. Hold the trigger in through the countdown sequence from 3 to 0.
Pitch Units Display Menu
3. When the counter reaches 0, you will see the unit setting change and a checkmark appear at the bot-
tom of the display.
4. Release the trigger to return to the standard locating screen.
NOTE: The pitch units can be set on both the receiver and the remote display. It is recommended
that the receiver and the remote display be set to the same pitch units.