User's Manual

Receiver
18 Vermeer
®
DigiTrak
®
L
T
™
Operator’s Manual
Telemetry Channel Setting
3. When the counter reaches 0, you will see a checkmark at the bottom of the display.
4. While still holding the trigger in, the channel settings will cycle through all nine settings—Off, 1, 2, 3,
4, 5, 6, 7, 8.
5. Release the trigger when the correct setting is displayed, and you will return to the locating mode
display screen.
BACKLIGHT
This display menu allows you to turn on or off the display backlight.
1. Click the trigger to advance to the backlight menu; a light bulb will appear on the display. If the
backlight is on, the bulb will be lit up; if it is off, the bulb will appear unlit.
2. Hold the trigger in through the countdown sequence from 2 to 0.
Backlight Is Turned Off Backlight Is Turned On