User's Manual

Receiver
16 Vermeer
®
DigiTrak
®
L
T
™
Operator’s Manual
Height-Above-Ground “Off” Screen
3. Continue to hold the trigger in through the countdown sequence from 2 to 0.
4. Release the trigger when the 0 is displayed, and a checkmark will briefly appear at the bottom of the
screen indicating this option has been selected. The height-above-ground function has now been
turned off, and you will be returned to the locating screen. With the height-above-ground function off,
you must place the receiver on the ground for accurate depth readings.
To set or change the height-above-ground measurement:
1. Hold the LT receiver at the height which you intend to hold the receiver.
2. Using a measuring tape, measure the distance from the bottom of the receiver to the ground. This is
your desired height-above-ground measurement.
3. From the locating screen, click the trigger to advance to the height-above-ground menu. You will see
the “On” option displayed.
4. Continue to hold the trigger in through the countdown from 2 to 0, and you will then see the “Off”
option displayed.
5. Continue to hold the trigger in through the countdown sequence from 2 to 0, and you will see the
“Set” option displayed.
Height-Above-Ground “Set” Screen