User's Manual

Receiver
®
Display Window Icons
Trigger down – Trigg
er is released; display windows show pitch, roll, and
distance/depth of the transmitter.
+%
- %
Pitch – Numbers from 0% to ±100% show the inclination of the transmitter with
respe
ct to horizontal; 100% represents a 45° angle (top left window, trigger down).
12
3
9
6
Roll – Numbers from 1 to 12 show the roll position (1 o’clock to 12 o’clock) of the
transmitter (t
op right window, trigger down).
x
Depth – The
bottom window displays the depth or slant distance of the transmitter
with respect to the surface of the ground when the trigger is down.
Trigger up –
Trigger is held in; display windows show signal strength, transmitter
temperature, and predicted depth when operator is at FNLP.
Signal strength – Numbe
rs from 0 to 999 are displayed to show the strength of the
signal from the transmitter (top left window, trigger up).
o
C
Transmitter temperature
– Temperature of the transmitter in degrees Celsius (top
right window, trigger up).
FNLP
x
+/
–
Predicted depth – The b
ottom window displays the predicted depth of the
transmitter at the FNLP when the trigger is up and the receiver is at the FNLP.
Customer
Service
Phone
Numbers:
800-288-3610
and
425-251-0559
Battery
Compartment
Orange Arrow
Indicates
Remote
Capability
Serial
Number
Telemetry
Information
DigiTrak Receiver – Front Panel DigiTrak
Receiver – Back Side
Showing Condensed Instructions Showing Identification Information
The front panel of the receiver has condensed instruction
s for quick field reference and DCI’s phone
numbers for troubleshooting assistance. There is also a sticker under the handle for temperature and dis-
tance conversions. The serial number is located on the back panel of the unit below the battery compart-
ment; it is preceded by the letters DR or DRR (for DigiTrak Receiver and DigiTrak Remote Receiver,
6 DigiTrak
®
Mark III Operator’s Manual