User's Manual

DIGITALCONTROLINCORPORATED
DigiTrak Falcon F5
®
Operator's Manual 71
Pitch →
Displayed Depth ↓
±10%
(5.7°)
±20%
(11°)
±30%
(17°)
±40%
(22°)
±50%
(27°)
±60%
(31°)
±75%
(37°)
±90%
(42°)
±100%
(45°)
1.52 m 1.52 m 1.50 m 1.45 m 1.37 m 1.32 m 1.27 m 1.17 m 1.07 m 0.76 m
3.05 m 3.02 m 2.97 m 2.87 m 2.77 m 2.64 m 2.51 m 2.31 m 2.13 m 1.52 m
4.57 m 4.55 m 4.47 m 4.32 m 4.14 m 3.96 m 3.78 m 3.48 m 3.20 m 2.29 m
6.10 m 6.07 m 5.94 m 5.74 m 5.51 m 5.28 m 5.03 m 4.65 m 4.27 m 3.05 m
7.62 m 7.59 m 7.44 m 7.19 m 6.91 m 6.60 m 6.30 m 5.79 m 5.33 m 3.81 m
9.14 m 9.09 m 8.92 m 8.61 m 8.28 m 7.92 m 7.54 m 6.96 m 6.40 m 4.57 m
10.67 m 10.62 m 10.41 m 10.08 m 9.65 m 9.25 m 8.81 m 8.13 m 7.47 m 5.33 m
12.19 m 12.14 m 11.89 m 11.51 m 11.02 m 10.57 m 10.06 m 9.27 m 8.53 m 6.10 m
13.72 m 13.64 m 13.39 m 12.93 m 12.42 m 11.89 m 11.33 m 10.44 m 9.63 m 6.86 m
15.24 m 15.16 m 14.86 m 14.38 m 13.79 m 13.21 m 12.57 m 11.61 m 10.69 m 7.62 m
Table C1: Determining Actual Depth from Displayed (Projected) Depth and Pitch
Use the projected/displayed depth values in the first column and transmitter pitches in the first row to find
actual depth.
Pitch →
Displayed Depth ↓
±10%
(5.7°)
±20%
(11°)
±30%
(17°)
±40%
(22°)
±50%
(27°)
±60%
(31°)
±75%
(37°)
±90%
(42°)
±100%
(45°)
1.52 m 0.10 m 0.20 m 0.28 m 0.38 m 0.48 m 0.53 m 0.64 m 0.74 m 0.76 m
3.05 m 0.20 m 0.41 m 0.58 m 0.76 m 0.94 m 1.07 m 1.27 m 1.45 m 1.52 m
4.57 m 0.30 m 0.61 m 0.89 m 1.14 m 1.40 m 1.63 m 1.91 m 2.16 m 2.29 m
6.10 m 0.41 m 0.79 m 1.17 m 1.52 m 1.85 m 2.16 m 2.54 m 2.90 m 3.05 m
7.62 m 0.51 m 0.99 m 1.47 m 1.91 m 2.31 m 2.69 m 3.18 m 3.61 m 3.81 m
9.14 m 0.61 m 1.19 m 1.78 m 2.29 m 2.79 m 3.23 m 3.81 m 4.32 m 4.57 m
10.67 m 0.71 m 1.40 m 2.06 m 2.67 m 3.25 m 3.78 m 4.47 m 5.05 m 5.33 m
12.19 m 0.81 m 0.69 m 2.36 m 3.05 m 3.71 m 4.32 m 5.11 m 5.77 m 6.10 m
13.72 m 0.91 m 1.80 m 2.64 m 3.45 m 4.17 m 4.85 m 5.74 m 6.48 m 6.86 m
15.24 m 1.02 m 2.01 m 2.84 m 3.84 m 4.65 m 5.38 m 6.38 m 7.21 m 7.62 m
Table C2: Determining Fore/Aft Offset from Displayed (Projected) Depth and Pitch
Use the projected/displayed depth values in the first column and transmitter pitches in the first row to find
fore/aft Max mode timer offset values.