User's Manual

Table Of Contents
DIGITALCONTROLINCORPORATED
4 DigiTrak Falcon F5
®
Operator's Manual
Before use, inspect the battery cap O-ring for damage that may allow water to enter the battery compartment.
Replace the O-ring if the one installed becomes damaged.
Do not use chemicals to clean the transmitter.
Placing tape around the fiberglass tube of the transmitter, if space allows, will keep the fiberglass protected
from most corrosive and abrasive environmental wear. Do not tape over the IR window as this will interfere
with IR communication.
Falcon transmitters have a threaded hole (1/4”-20 thread) in the battery cap to allow the use of an
insertion/extraction tool for installing and removing the transmitters in end-load housings. Ensure this hole
remains clear of debris.
Send in the Product Registration Card or register online at access.DigiTrak.com for the 90-day Limited
Warranty.