User's Manual
Table Of Contents
- Safety Precautions and Warnings
- Dear Customer:
- Introduction
- Receiver
- Transmitter
- Remote Display
- Battery Charger
- Locating
- The Target Steering Function
- Appendix A: System Specifications and Maintenance Requirements
- Appendix B: Projected Depth Versus Actual Depth and the Fore/Aft Offset
- Appendix C: Calculating Depth Based on Distance Between FLP and RLP
- LIMITED WARRANTY
DIGITAL CONTROL INCORPORATED
DigiTrak
®
F2™ Operator’s Manual 7
Dear Customer:
Thank you for choosing the DigiTrak
®
F2™ Locating System. We are proud of
the equipment that we have been designing and building in Washington State
since 1990. We believe in providing a unique, high-quality product and standing
behind it with superior customer service and training.
Please take the time to read this entire manual—especially the section on safety.
Also, please fill in the warranty registration and mail or fax it to us at 253-395-
2800. We will put you on the Digital Control mailing list and send you product
upgrade information and our FasTrak™ newsletter.
Feel free to contact us at any of our global offices listed on the front cover if you
have any problems or questions. Our Customer Service Department is available
24 hours a day, 7 days a week to provide assistance.
As the horizontal directional drilling industry grows, we’re keeping our eye on the
future to develop equipment that will make your job faster and easier. Stay
current by visiting our web site on the internet at www.digitrak.com or by giving
us a call.
We welcome questions, comments, and ideas.
Digital Control Incorporated
Kent, Washington
2009