User's Manual

Target Steering
DigiTrak
®
F5 User Guide 58
Steering to the Target
The Target Steering screen will display on the remote when a
target depth has been programmed in the receiver.
Target Steering on Remote Display
The steering indicator in this case shows that the drill head is
to the left and too low for the intended path. A steering
command of approximately 1 o’clock would bring the drill
head toward the target. The transmitter is online to reaching
the target, when the steering indicator is centered on the
crosshairs. Note that, for quick interpretation, the pointed end
of the steering indicator corresponds to the clock position of
the drill head.
Steering
Indicator
Center of
Crosshairs
Horizontal
Distance
Between
Transmitter
and Receiver
Predicted
Depth of
Transmitter