User's Manual

Navigating Menus
39 DigiTrak
®
F5 User Guide
Settings Menu
FSD Settings Menu Screen
The table below shows the menu options as they appear on
the display with descriptions of their uses. Any changes that
are made to the settings will be saved when the FSD unit is
turned off. DCI recommends that you program the FSD
settings to match the settings on your receiver.
FSD Settings Menu Options
Telemetry Channel – Opens telemetry channel
options: 1, 2, 3, and 4.
The remote and the
receiver must be set to the same channel.
Receiver Model – Allows you to program the FSD
unit to work with an F5, F2, SE, Eclipse, or MK
Series receiver. If a receiver other than the F5 is to
be used, see the MFD/FSD Operator’s Manual.
Telemetry Frequency Designation – Opens the
telemetry region options. If you must change this
setting, call DCI to determine which setting is
required in your area and to verify it matches the
receiver frequency.
Depth Units – Allows you to select distance units
as either English or metric. When English units are
selected, the temperature will display in degrees
Fahrenheit (°F). When metric units are selected,
Telemetry
Channel
(Shown
Highlighted)
Depth Units
Receiver Model
Exit
Telemetry
Frequency
Designation
Function of
Highlighted
Option
Pitch Units