User's Manual

Navigating Menus
35 DigiTrak
®
F5 User Guide
Using the Keypad
The keypad shows anytime the keypad icon is selected. It is
used for setting a height above ground for the HAG function
and setting a target depth for the Target Steering function.
The keypad screen will appear slightly differently depending
on which units are active.
Inches and Decimal Distance Keypad
The decimal keypad will appear when the receiver units are
set to meters (x.xx m) or feet (x.xx’). The inches keypad
appears when the receiver units are set to inches (xx”). The
inches keypad is the same as the decimal keypad shown
below except the decimal option will not show.
Decimal Keypad
Use the toggle switch to highlight the number or decimal you
wish to select and then pull the trigger to select it. Enter each
number left to right and select the backspace option to delete
the last digit selected. When the value in the display window
matches the value you wish to program, highlight and select
the “return” arrow to lock in the value and turn on the function.
Feet and Inches Keypad
The feet and inches Keypad appears when the receiver units
are set to feet/inches (x’xx”) and the keypad function is
selected in the set HAG or Target Depth Menu.
Display
Window
Return Arrow
Exit
Backspace
Decimal Point
(will not show
with receiver in
inches mode)
Feet Setting
(Shown Active)