User's Manual

Navigating Menus
33 DigiTrak
®
F5 User Guide
Telemetry Channel Menu
The telemetry channel menu has five telemetry setting
options (1, 2, 3, 4, 0) and an exit button. Selecting the exit
button will return the screen to the settings menu with no
change to the telemetry channel setting. Selecting “0” will turn
off the telemetry function. For communication to occur
between the receiver and remote display, both devices must
be set to the same telemetry channel.
To set the telemetry channel on the receiver, use the toggle
switch to highlight the desired telemetry channel and pull the
trigger. The confirmation tone will sound as the screen
returns to the settings menu.
Roll Offset Menu
Roll offset is needed when the 12 o’clock position of the
transmitter cannot be indexed to that of the drill head.
When the roll offset option is selected from the settings menu,
the following screen will appear.
Roll Offset Menu
To electronically compensate the transmitter to match the drill
head’s 12’clock position, select the Set and Enable Roll
Offset option from the Roll Offset menu. A screen such as the
following will display.
Exit Button
Enable Roll
Offset
(Shown
Highlighted)
Disable Roll
Offset